Taurus LBR

 Taurus LBR Parts
We are now manufacturing the internal parts previously unavailable in the UK
 
    

 Taurus Revolver Extension Rod Fitting Kit
A full kit of fixing parts and bonding compound for one rod plus re-usable machining jig and tooling allowing secure and permanent replacement of the standard "coat hanger" just add the extension rod and rod end of your choice below. (requires access to/use of a pillar drill) 








LBR_Rod_Instructions
 
  


Purchase £80.00
Rental £30.00  plus £50.00 refundable deposit
 Image of Taurus Revolver Titanium Extension Rod and Rod End Fitted to a Stainless Taurus 
 Taurus Revolver Micro Red Dot Scope Rail / Mount
An Aircraft Grade Aluminium base replaces the rear sight with options for Aluminium or 3K Carbon Fibre sight mount plate or a short rail in Aluminium, Blued Steel or Carbon Fibre.
Currently available for the Shield Mini Sight Micro Red Dot Sight and Vortex Razor Micro Red Dot Sight, available to order for other micro red dot sights to customer's provided pattern. 
 

 From £95.00 + P&P
  Taurus Revolver Cylinder Advance Pawl (Sometimes referred to as a "Hand") 
A CNC machined and hand finished carbon steel Advance Pawl with Silver Steel pins. 
Also available as a "Gunsmith Fit" part allowing the Gunsmith of your choice to fit it up to best suit your gun's action. 

A link to a quick video showing installation

Please note, you should not actuate the trigger without the cover plate fitted as it supports the trigger pivot pin and pulling the trigger without both ends of the pivot pin supported could lead to bending or breakage of the pin. 
 


£45 + P&P 
  Taurus Revolver 20mm Scope Rail / Mount
An Aircraft Grade Aluminium base replaces the rear sight, providing the rear mounting point for the rail, a forward support point mounts securely to the rearmost barrel rib vent but without any risk of damage to the gun's finish


 

£75.00 + P&P
 Taurus Revolver Stainless Extension Rod
A Stainless Steel extension rod to replace the standard "coat hanger" incorporating the ideal bend position and angle to clear the shooter's wrist.
 

£20.00
 Taurus Revolver Titanium Extension Rod
A Titanium extension rod to replace the standard "coat hanger" incorporating the ideal bend position and angle to clear the shooter's wrist.
 
£25.00
 Taurus Revolver Aluminium Teardrop Rod End
A tapered, Aluminium rod end with hemispherical tip to fit the above extension rods
 
£20.00
 Taurus Revolver Stainless Teardrop Rod End
A tapered, Stainless Steel rod end with hemispherical tip to fit the above extension rods
 
£25.00
 Taurus Revolver Titanium Teardrop Rod End
A tapered stainless rod end with hemispherical tip to fit the above extension rods
 
£30.00
 Taurus Revolver Extension Rod Fixing Kit
Threaded and countersunk fixing discs with screw and bonding compound for permanent fixing of additional rods using the extension rod fitting kit
 

£15.00
 Taurus Revolver Firing Pin
This is available by arranging the order through your local RFD. 
 £POA
  Taurus Revolver Transfer Bar

 
£POA
 Taurus Revolver Cylinder Stop (Locking Hand) Plunger

 
£18.50
 Taurus Revolver Cylinder Stop (Locking Hand) Plunger Spring

 
£10.50
  Taurus Revolver Cylinder Crane Retaining Screw

 
         

£15.00
 Taurus Revolver Cylinder Crane Retaining Screw Plunger
 
 
£18.50
 Taurus Revolver Cylinder Crane Retaining Screw Plunger Spring
 
 
£10.50
 Taurus Revolver Cylinder Ejector Return Spring

 £15
 Taurus Revolver Rear Sight Elevation Screw
This is the cross-pin retained variant with a transverse hole in the screw head, with the screw is included the spring and balls which prevent the screw creeping in use and give the adjustment it's click. 
 

£35
 Taurus Revolver Cylinder Locating/Retaining Pin Spring £25.00
 Unavailable and Custom Parts Made to Order
All parts listed are precision machined and hand finished and have been made to meet customer requirements for unobtainable spares, if you can't get the part you want or need for your Taurus revolver just email for a quote to have it made to order, larger parts are manufactured from a Solution Hardening Stainless Steel and are heat treated. 
 


£POA

Comments